10
REF 360-0040-01 (F)
GILAIR-3 & GILAIR-5 AIR SAMPLING PUMPS
(7.5)
0
. Indicates percent of time pump runs
outside of
±
5% fault tolerance envelope
during sampling run. Maximum indication is
9% regardless of actual performance.
(7.6) 4-Character Display. Display letters and
messages listed below (Program model only
unless otherwise noted):
C
Cycles. The number of times the Run
Time interval is performed.
PC
Basic program which does the simple
clock mode.
P1
User-defined program.
P2
User-defined program.
P3
User-defined program.
P4
User-defined program.
P5
User-defined program.
P6
User-defined program.
E
Programming error.
LAST
Flashes alternately with the run time,
R
(7.3), and
0
(7.5) icons displayed (Clock
& Program models).
Old
Flashes alternately with the run time,
R
(7.3), and
0
(7.5) icons displayed. Re-
fers to run data prior to the
LAST
sam-
pling run (Program model only).
SHUT/OFF (alternately)
Reminder message to turn the pump
off. It indicates that 5 minutes have
elapsed since:
1) a fault condition has terminated the
sampling run, or
2) a programmed sampling run has
reached completion.
CAL
Flashing: prepared to run the pump without
gathering sampling data. Non-flashing:
pump is running; enables calibration of
pump’s air flow rate (Clock & Program
models).
(8) MODE/HOLD button. Mode Change.
Hold Operation.
(9) PROG button. Program Select.
Accept Variable or Value shown on display.
(10)
▲
and
▼
buttons. Increase or decrease a value or
scroll through a menu list.
(11)Rotameter. Use as reference only. Actual flow
should be set using a Gilibrator or another flow
calibration device.
