Sensia 3300 EFM, Installation, Operation & Maintenance Manual

Page: 79 / 101

4. Cut and remove the tie straps ( Figure 5.1, page 71 ) on the extra length of the SAS cable, and disconnect it from
the display assembly (as shown in Figure 5.3 ).
SAS Cable
SAS tooth lock
Rubber seal
Display board
Figure 5.3 - Scanner 3300 display assembly and main enclosure assembly.
5. Put the old display assembly aside.
6. Remove packaging from the new display assembly, ensuring the new display assembly is protected from static.
7. Connect the SAS cable to the new display assembly, and tie wrap the excess length to the inside of the enclosure (as
shown in Figure 5.1, page 71 ).
8. Use the four screws to attach the new display assembly to the plate (shown in Figure 5.2, page 72 ).
9. Connect external power (if applicable).
10. Connect Ethernet plug.
73
Scanner 3300 EFM Section 5