Sensia 3300 EFM, Installation, Operation & Maintenance Manual

Page: 18 / 101

Table 1.1—General Specifications
Digital I/O
(cont’d)
Output Modes Pulse (based on pulse count or time period)
Alarm (based on the status of any or all selected alarms; up to 32 user-
configured alarms are selectable)
Conditional (value above or below setpoint, out of setpoint range)
Programmed [time of day or output state (normally open, normally
closed)]
Configurable to track any value including PID Control applications
POUT1 and POUT2 mirror DO 5 and 6
Pulse Output
Maximum frequency: 500 Hz
Configurable pulse duration (10 msec to 1 day)
Configurable pulse representation (1 pulse = 1 MCF) based on time or
volume
Based on any accumulator (flow run or turbine meter run)
Alarm Output Low/high
Out-of-range
Status/diagnostic
Web Interface—
Local Device
Management
Access data and device settings via the advanced display on the front of the device
Configure, calibrate, and maintain flow runs, inputs/outputs, and gas streams
Poll real-time data
Download data
View daily logs and up to 7 days of interval (recent) logs
Control user access with four levels of security
Configure communications with up to 20 wired or wireless Scanner 2000 Series devices
Display real-time data, flow rate calculation method, and input averages for up to 20 slave
devices
Read and store configuration data from up to 20 slave devices
Read and store daily and interval archive records for up to 20 slave devices
Change gas composition and plate size in slave device configurations
Download slave data via FTP, HTTP, or Enron Modbus protocol
Synchronize slave device configuration and slave archive data
Read gas streams connected to slave devices
Clear slave device grand totals and alarms
Load factory default configuration file
Remotely reset slave device without cycling power
12
Section 1 Scanner 3300 EFM