Sensia 3300 EFM, Installation, Operation & Maintenance Manual

Page: 75 / 101

Troubleshooting the Wireless Connection
If the Wi-Fi connection seems to be failing, consider the following steps to address the problem:
1. Check if the Wi-Fi subnet is the same as the Ethernet subnet. If so, change it to be different, as the Scanner 3300 will
shutdown the Wi-Fi if these two subnets are identical.
2. Shut off the laptop and restart it.
3. If the Scanner 3300 is powered, but no wireless connectivity is detected on your computer or other browser-en
-
abled device, it may be necessary to reset the Scanner 3300 IP address. Please contact Sensia technical support for
assistance.
Adding Security to the WiFi Connection
Wi-Fi security is disabled at the factory during initial modem configuration, but users can enable security by logging into
the modem web browser menu, as follows:
1. Open a web browser on a laptop or smartphone.
2. Enter the modem’s IP/port address, 192.168.168.1:8080.
3. When prompted, enter the following user name and password to access the main modem screen:
User Name: admin
Password: admin
4. Click the
Wireless
tab in the top bar, and the
Radio 1
tab from the second bar at the top of the screen.
5. From the
Radio 1
tab, locate the “Encryption Type” field near the bottom of the screen.
6. Select an encryption type from the dropdown list.
7. Enter a password if desired, and click
Submit
.
69
Scanner 3300 EFM Section 4