Sensa Core ST-200 aQua, Operator'S Manual

Page: 89 / 92

ST-200 aQua
Operator’s Manual
88
PRINT STORED RESULTS Allows operator to display last sample
results or print stored results
PROBE IN SAMPLE Requests operator to confirm that probe
is in sample.
PROBE IN CLEANER Requests operator to confirm that probe
is in Daily Cleaning Solution
PUMPING AIR Message will appear when air pumps
PUMPING CAL A Message will appear when CAL A reagent
gets pumped
PUMPING CAL B Message will appear when CAL B reagent
gets pumped.
PUMP CAL ERROR Failure of Pump cal Test.
PUMPING LIQUID Message will appear when liquid is
pumped
PUMP SPEED = FAST Allows the operator to set the pumping
speed fast
PUMP SPEED = SLOW Allows the operator to set the pumping
speed slow
REAGENT CONSUMPTION Allows the operator to check the quantity
of the reagent solution consumed
REAGENT PACK Allows operator to check the reagent
pack details.
REAGENT PACK CONSUMPTION Allows operator to display % pack
expended
REGEANT PACK ID Allows the operator to check the pack ID
REAGENT PACK INFO Allows the operator to check the pack
information
REMOVE SAMPLE FROM PROBE Requests operator to remove sample from
probe.
RFID READ ERROR When there is an error in RFID reading.
SAMPLE DETECTOR TEST Message will appear during sample detect
test