Sensa Core ST-200 aQua, Operator'S Manual

Page: 28 / 92

ST-200 aQua
Operator’s Manual
27
CALIBRATION SLOPE
Na = _______
K = _______
iCa = _______
Li = _______
pH = _______
Cl = _______
Finally displays calibration slope & instrument is ready for analysis.
D. Standby
Placing the ST-200 aQua in STANDBY mode reduces reagents
consumption by discontinuing automatic calibrations. The analyzer does,
however, draw a small amount of calibrant A solution to prevent the
electrodes from drying out which is called as “Sipping”. To place the ST-
200 aQua in standby mode, press STANDBY key.
After pressing STANDBY key
↓
*** STANDBY ***
N→ Exit
Press N
↓
EXITING
STANDBY MODE
Pressing Standby Button:
Figure 15