Certificate Number: 18-HS1717491-PDA
21/MAR/2018
Confirmation of Product Type Approval
Please refer to the "Service Restrictions" shown below to determine if Unit Certification is required for this product.
This certificate reflects the information on the product in the ABS Records as of the date and time the certificate is
printed.
Pursuant to the Rules of the American Bureau of Shipping (ABS), the manufacturer of the below listed product held
a valid Manufacturing Assessment (MA) with expiration date of 14-MAR-2023. The continued validity of the
Manufacturing Assessment is dependent on completion of satisfactory audits as required by the ABS Rules.
And; a Product Design Assessment (PDA) valid until subject to continued compliance with the Rules or standards
used in the evaluation of the product.
The above entitle the product to be called Product Type Approved.
The Product Design Assessment is valid for products intended for use on ABS classed vessels, MODUs or facilities
which are in existence or under contract for construction on the date of the ABS Rules used to evaluate the
Product.
ABS makes no representations regarding Type Approval of the Product for use on vessels, MODUs or facilities
built after the date of the ABS Rules used for this evaluation.
Due to wide variety of specifications used in the products ABS has evaluated for Type Approval, it is part of our
contract that; whether the standard is an ABS Rule or a non-ABS Rule, the Client has full responsibility for
continued compliance with the standard.
Product Name: Battery Charger
Model Name(s): MicroGenius S2 and S4
Presented to:
STORED ENERGY SYSTEMS, LLC
1840 INDUSTRIAL CIRCLE
CO 80501
United States
Intended Service:
Marine and Offshore Applications
Description:
MicroGenius S2 and S4: Switchmode, regulated, filtered,
microprocessor-controlled, current limited battery charger designed for heavy-duty
industrial service. Primary application: quick recharge and long-life maintenance of
engine start batteries and ultracapacitors.
Tier:
3
Ratings:
Output Voltage:12 or 24 VDC Nominal Output Current::16-60 Amps Input Voltage:
90-265VAC Input Frequency: 47/63 Hz Input Current: S2: 8Amps Max (at 100
VAC), S4: 16 Amps Max (at 100 VAC) Operational temperature meets full
specification: -40 ºC to +40 ºC Enclosure: IP 22 aluminum/stainless steel enclosure
Service Restrictions:
- Unit Certification is not required for this product. If the manufacturer or purchaser
request an ABS Certificate for compliance with a specification or standard, the
specification or standard, including inspection standards and tolerances, must be
clearly defined. - Not suitable for installation in hazardous areas.
Comments:
- The Manufacturer has provided a declaration about the control of, or the lack of
Asbestos in this product. - End user must use output cables that have sufficient
current carrying capacity as per ABS Steel Vessel Rules 4-8-2/7.7.1.
Notes / Documentation:
Drawing No. COMPLIANCE SPEC MicroGenius S2 and S4, Pages:4 Drawing No.
2DCAD-S2-STD, 2DCAD, S2, STANDARD, Revision: A, pages:1 Drawing No.
03/21/2018 12:59:27 PM
Copyright 2001 American Bureau of Shipping. All rights reserved.
Page 1 of 3
