Configuring the conference system
22
Configuring the conference system
This chapter provides information on how to quickly and easily configure
the consoles of your conference system (but not the consoles of the
interpretation system) using the software.
For configuring the conference system, you require the S-MM (Microphone
Management) software module which is started as follows:
왘
Click “Start” and select “Programs”, “SDC 8200” and “S_CM” one after
the other. Then click “Confsys”.
The “SDC 8200” window opens.
The “SDC 8200” window consists of:
y
the menu bar
If you have not licensed all of the software modules, some of the menus
will not be available in your software.
y
the “Start” button
for starting an already existing conference configuration
y
the “Delegates” button
for opening an editing the delegate database,
y
the “Agenda” button
for opening and editing the agenda,
y
the “Room Configuration” button
for opening and editing the synoptic view
y
the status bar
which shows the current date, the current time and the state of the COM
connection to the central unit (“Connected” or “Disconnected”). In
addition, the number of slave and video PCs connected to the master PC
and the communication errors between the SDC 8200 CU central unit and
the master PC are displayed.
Summary of Contents for SDC 8200 SYS
Page 1: ...Software SDC 8200 SYS SDC 8200 SYS M Software Manual...
Page 115: ...Index 115...
