Operating the components of the SDC 8200 system
42
Working with the central unit’s operating menu
To choose a menu item from the central unit’s operating menu:
왘
Make sure that the central unit is turned on and that all conference/
interpreter consoles are connected.
The start display appears, showing the current volume setting for the
consoles’ built-in loudspeakers (see “Setting the volume of the con-
soles’ built-in loudspeakers” on page 85) and to which of the central
unit’s ports P1 to P6 a cable string is connected (see “Making a system
diagnosis” on page 109).
왘
Press the ENTER key
.
You get to the first main menu “
Conference
”.
왘
Turn the jog wheel
until the desired main menu is shown on the dis-
play and press the ENTER key
.
You enter the desired main menu.
왘
Turn the jog wheel
until the desired submenu is shown on the dis-
play and press the ENTER key
.
You enter the desired submenu where you can choose between addi-
tional submenu items by using the jog wheel
or choose a setting (in
this case, the current value and the text “Press ENTER to Save” are
shown on the display).
왘
To change the current value:
Turn the jog wheel
until the desired value is shown on the display
and press the ENTER key
.
The new value is saved and you return to the previous menu level.
왘
To keep the current value unchanged:
Press the EXIT key
.
The current value remains unchanged and you return to the previous
menu level.
왘
To exit the central unit’s operating menu, press the EXIT key
repeat-
edly until the start display appears.
Via the central unit’s operating menu, you can
y
select one out of ten possible conference modes (see “Selecting a confer-
ence mode” on page 88)
Note!
The selection of some of the conference modes only makes sense if
your conference and interpretation system is PC controlled
y
adjust the volume, treble, middle and bass response of the consoles’
built-in loudspeakers (see “Adjusting the audio settings for the con-
soles’ built-in loudspeakers” on page 88)
y
configure the options for the conference (see “Configuring the confer-
ence system” on page 85) and interpretation system (see “Configuring
the interpretation system” on page 93)
y
initialize the conference consoles (see “Automatically initializing all con-
ference consoles” on page 85 or see “Manually initializing all conference
consoles” on page 85) and the interpreter consoles (see “Half-automat-
ically initializing all interpreter consoles on the central unit” on page 99
or see “Manually assigning an interpreter console an individual booth
number” on page 100)
y
specifiy the indication of the voting options on the displays
>Volume =
P1
P2
P3
P4
P5
P6
Summary of Contents for SDC 8200 AO
Page 1: ...Conference System SDC 8200 System Manual...
Page 127: ......