![background image](http://html1.mh-extra.com/html/sennheiser/sdc-8200-ao/sdc-8200-ao_system-manual_1240107110.webp)
Configuring the SDC 8200 system
110
Checking the communication within a cable string
To display if and on which port(s) a communications error has occured:
왘
From the central unit’s operating menu, choose “
System
”,
“
Diagnostics
” and “
Port Errors
” one after the other.
The ports “
P1
“ to “
P6
“ with a respective symbol are shown on the dis-
play.
The symbols have the following meanings:
: A cable string with consoles is connected to the port.
: No cable string is connected to the port. If this symbol appears even
though a cable string is connected to the port, check if the cable string
is connected correctly.
[!]
: A communications error has occured. This symbol only appears if a
cable string is connected to the port.
Configuring connected additional components
Turning on/off a camera control
If you connect an external camera control to the central unit, you have to
activate the camera control via the central unit’s operating menu.
To turn a connected camera control on:
왘
From the central unit’s operating menu, choose “
System
” and “
Camera
Control
” one after the other.
The current status of the camera control is shown on the display.
왘
Choose “
Status = ON
” and press the ENTER key to save your setting.
Turning on a connected control panel
instead of controlling the SDC 8200 conference and interpretations system
via a PC with software control, you can use a control panel (optional).
The control panel is a miniature physical representation of your conference
room, allowing you to turn on or off individual conference consoles, change
the volume, change the conference mode, display the status of the inter-
preter booths, etc.
The control panel will be custom tailored to your specific requirements.
To turn a connected control panel on:
왘
From the central unit’s operating menu, choose “
System
” and
“
Control Panel
” one after the other.
The current status of the control panel is shown on the display.
왘
Choose “
Status = ON
” and press the ENTER key to save your setting.
Diagnostics
1
Port Errors
Port Errors
[!]
P1
P2
P3
P4
P5
P6
System
2
Camera Conrol
Camera Control
Status = OFF
Press ENTER to Save
System
3
Control Panel
Control Panel
Status = OFF
Press ENTER to Save
Summary of Contents for SDC 8200 AO
Page 1: ...Conference System SDC 8200 System Manual...
Page 127: ......