![background image](http://html1.mh-extra.com/html/sennheiser/sdc-8200-ao/sdc-8200-ao_system-manual_1240107030.webp)
Operating the components of the SDC 8200 system
30
5.
In “
Group 3
” mode:
In this mode, the speaker limit is 3.
왘
Press the microphone key
.
If the speaker limit has not yet been reached, you can take the floor
immediately. The red signal light ring
and the “Microphone active”
LED
on your console light up permanently, indicating that you can
now take the floor.
If the speaker limit has been reached, you will join the waiting list and
the green “Request to speak” LED
on your console starts flashing. As
soon as one of the active microphones is turned off, the microphone of
the first participant from the request-to-speak list is turned on, and so
on.
When it is your turn to speak, the red signal light ring
and the
“Microphone active” LED
on your console light up permanently.
6.
In “
Group 4
” mode:
In this mode, the speaker limit is 4.
왘
Press the microphone key
.
If the speaker limit has not yet been reached, you can take the floor
immediately. The red signal light ring
and the “Microphone active”
LED
on your console light up permanently, indicating that you can
now take the floor.
If the speaker limit has been reached, you will join the waiting list and
the green “Request to speak” LED
on your console starts flashing. As
soon as one of the active microphones is turned off, the microphone of
the first participant from the request-to-speak list is turned on, and so
on.
When it is your turn to speak, the red signal light ring
and the
“Microphone active” LED
on your console light up permanently.
7.
In “
Override
” mode:
In this mode, the speaker limit is variable between 1 and 15.
왘
Press the microphone key
.
Pressing the microphone key on your console will automatically turn
off the microphone which is active for the longest time. The red signal
light ring
and the “Microphone active” LED
on your console light
up permanently, indicating that you can now take the floor.
Note!
The chairman units and VIP units remain unaffectedly active.
8.
In “
No request
” mode:
For this mode to function, the SDC 8200 system must be PC controlled.
In “No request” mode, you have to “apply” for a comment and wait until
the conference manager turns on your microphone. The conference man-
ager has total control of the microphones.
Summary of Contents for SDC 8200 AO
Page 1: ...Conference System SDC 8200 System Manual...
Page 127: ......