![background image](http://html1.mh-extra.com/html/sennheiser/sdc-8200-ao/sdc-8200-ao_system-manual_1240107122.webp)
Appendix B: Control panel protocol
122
Appendix B: Control panel protocol
The SDC 8200 conference and interpretation system supports a control
panel. The central unit sends a control command to the connected control
panel:
y
when a delegate or chairman unit is activated,
y
when a delegate or chairman unit is deactivated,
y
when a microphone goes into request mode,
y
when all active microphones are deactived simultaneously
(priority function).
The control panel sends a control command to the central unit:
y
when a delegate or chairman unit is to be activated,
y
when a delegate or chairman unit is to be deactivated,
y
when the control panel is to be reset (Reset).
The control panel must be connected to the central unit’s COM 2 interface
(RS 232 connection). The settings for the communications port for the
control panel are:
Bits per second: 19,200
Data bits:
8
Parity:
None
Stop bits:
1
Flow control:
None
Commands
All commands sent by the central unit start with a “%” sign. The last char-
acter is a character which states the end of the transmission. Just before
the end-of-transmission character, there are four characters within the
command sent to the camera control which account for the CRC checksum.
The CRC checksum is in uppercase hexadecimal form while all other num-
bers are in decimal form.
STX “%”
data
CRC
ETX
Start of Transmis-
sion Character
(0x25 = “%”)
Data of the com-
mand
16 bit sum of the
ASCII characters
between STX and
CRC
End of Transmis-
sion Character
(0x0D)
Summary of Contents for SDC 8200 AO
Page 1: ...Conference System SDC 8200 System Manual...
Page 127: ......