![background image](http://html1.mh-extra.com/html/sennheiser/sdc-8200-ao/sdc-8200-ao_system-manual_1240107105.webp)
Configuring the SDC 8200 system
105
To adjust the volume difference between the XLR-3M socket and the 15-
pole sub-D socket:
왘
From the central unit’s operating menu, choose “
Aux-In/Out
” and
“
Aux Out 1
” one after the other.
왘
Choose “
Volume XLR
”.
The current volume is shown on the display.
왘
Reduce the volume and press the ENTER key to save your setting.
Assigning a channel to an audio output
Each of the audio outputs AUX OUT 2, AUX OUT 3, AUX OUT 4, AUX OUT 5
and AUX OUT 6 can be assigned a channel. The maximum number of chan-
nels available depends on your license. The configuration of four channels/
languages is license-free. In order to be able to configure more than four
channels/languages (SDC 8200 CU only), you have to purchase one of the
language licenses available.
Note!
The floor channel is always assigned to the audio output AUX OUT 1.
This assignment cannot be changed!
To assign a channel:
왘
From the central unit’s operating menu, choose “
Aux-In/Out
”.
왘
Choose one of the audio outputs AUX OUT 2 to AUX OUT 6.
왘
Choose “
Channel
”.
The current channel number is shown on the display.
왘
Choose the desired channel number and press the ENTER key to save
your setting.
The desired channel is available at the selected audio output.
This system is capable of producing sound pressure
exceeding 85 dB(A). 85 dB(A) is the sound pressure cor-
responding to the maximum permissible volume which is
by law (in some countries) allowed to affect your hearing
for the duration of a working day. It is used as a basis
according to the specifications of industrial medicine.
Higher volumes or longer durations can damage your
hearing. At higher volumes, the duration must be short-
ened in order to prevent hearing damage. The following
are sure signs that you have been subjected to excessive
noise for too long a time.
y
You can hear ringing or whistling sounds in your ears.
y
You have the impression (even for a short time only)
that you can no longer hear high notes.
Aux Out 1
2
Volume XLR
Aux Out 1
Volume XLR = 24
Press ENTER to Save
Aux Out 3
2
Channel
Aux Out 3
Channel = 00
Press ENTER to Save
Summary of Contents for SDC 8200 AO
Page 1: ...Conference System SDC 8200 System Manual...
Page 127: ......