39
www.selwoodproducts.com
Step 21: Attach Ground Stakes
A:
Drive 3 (0318) Ground Stakes 10-1/2” into the ground against (1792) Lower Side at 3 (2469) Posts as
shown in fig. 21.1. Attach using 2 (S3) #8 x 2-1/2” Wood Screws per ground stake. (fig. 21.1 and 21.2)
B:
Inspect for open 3/8” holes. Insert Hole Plugs into all unused holes. (fig. 21.3)
MOVE FORT TO FINAL LOCATION. FINAL LOCATION MUST BE LEVEL GROUND
Warning! To prevent tipping and avoid potential injury, stakes must be
driven 10-1/2” into ground. Digging or driving stakes can be dangerous if
you do not check first for underground wiring, cables or gas lines.
Wood Parts
3 x
Ground Stake 1-1/4 x 1-1/2 x 14”
6 x
#8 x 2-1/2” Wood Screw
Hardware
Fig. 21.2
S3
0318
1792
10-1/2”
In Ground
2469
Fig. 21.1
0318
S3
1792
2469
Fig. 21.3
Slide Sold Separately
Other
Hole Plugs
Hole Plug
