24
www.selwoodproducts.com
Wood Parts
Hardware
Step 9: Rock Wall Frame Assembly
2 x
Rock Rail 2 x 3 x 50”
1 x
Lower Front 1 x 6 x 39-3/4”
2 x
Corner Block 2 x 3 x 4-1/2”
2470
2 x
#8 x 3” Wood Screw
4 x
#8 x 1-1/2” Wood Screw
10 x
#8 x 1-3/4” Wood Screw
1767
S4
A:
Attach (1766) Corner Block flush to the bottom and side of 1 (2470) Rock Rail with 2 (S4) #8 x 3” Wood
Screws, as shown in fig. 9.1. Notice which direction the angled edge of (2470) Rock Rail faces.
B:
Place Rock Rail Assembly, from Step 9A 5/8” above (1764) Floor Front and tight to (2469) Post on the Cafe
Side. (fig. 9.3 and 9.4). Attach (2470) Rock Rail to (1764) Floor Front with 2 (S15) #8 x 1-3/4” Wood Screws as
shown in fig. 9.2 and 9.3.
C:
Attach (1792) Lower Side to (1766) Corner Block with 2 (S2) #8 x 1-1/2” Wood Screws. (fig. 9.2)
D:
Attach a second (2470) Rock Rail 5/8” above (1764) Floor Front, flush to the inside edge of (1747) Centre
Divider with 2 (S15) #8 x 1-3/4” Wood Screws as shown in fig. 9.2 and 9.3. Maintain 17” from outside of (2470)
Rock Rails, top and bottom. (fig. 9.4)
E:
Place a second (1766) Corner Block flush to the end of (1792) Lower Side on the Swing Side and attach with
2 (S2) #8 x 1-1/2” Wood Screws as shown in fig. 9.2 and 9.5.
F:
Attach (1767) Lower Front to both (2470) Rock Rails and (1766) Corner Block on the Swing Side with 6 (S15)
#8 x 1-3/4” Wood Screws. (fig. 9.2)
Fig. 9.2
Cafe Side
Fig. 9.1
2470
1792
1747
Swing Side
Fig. 9.4
Fig. 9.5
Fig. 9.3
17”
2470
1766
1766
S2
Flush
1764
2469
1792
S4
1767
S15
x 6
S15
S15
S2
2470
1764
2469
S15
1764
2470
S15
S2
1766
5/8”
1766
Flush
