33
www.selwoodproducts.com
A:
Pre-drill pilot holes for the screws using a 1/8” drill bit, centred on the ends of each (2445) Side Top, then attach
(1796) Top Ends to each (2445) Side Top with 4 (S2) #8 x 1-1/2” Wood Screws per board. Make sure the top of
(1796) Top Ends are flush to the tops of each of (2445) Side Top. (fig. 17.1)
B:
At all 4 corners attach 1 Corner Brace using 3 (S5) #8 x 1/2” Pan Screw per brace as shown in fig.17.1 and
17.2.
C:
Attach (1900) Ridge flush to the end of (2447) SW Mount with 2 (S4) #8 x 3” Wood Screws and to (2451) Tarp
Support with 1 (S4) #8 x 3” Wood Screws as shown in fig. 17.1.
Step 17: Roof Frame Assembly
Other Parts
Hardware
Wood Parts
Fig. 17.1
3 x
#8 x 3” Wood Screw
8 x
#8 x 1-1/2” Wood Screw
12 x
#8 x 1/2” Pan Screw
2 x
Top End 1 x 4 x 46-1/2”
1 x
Ridge 2 x 2 x 46-3/4”
S4
1796
1796
1900
S2
4 x Corner Brace
Fig. 17.2
S2
S2
1796
S4
1900
2447
2445
2445
2451
Flush
1796
2445
x 3 per brace
S2
Corner Brace
S5
S5