Step 8: Connect Monkey Ladder Assembly to Fort
Hardware
A:
Attach the Swing Rail Assembly to the inside face of (A8) SW Block using 1 (G5) 5/16 x 4-1/2” Hex Bolt (with
lock washer, flat washer and t-nut) in the top hole of the Triangle Plate and 1 (G11) 5/16 x 3-1/2” Hex Bolt (with
lock washer, flat washer and t-nut) in the bottom hole, as shown in fig. 8.1 & 8.2.
B:
Attach Swing Rail Assembly to the outside face of the (A3) SW Mount with 1 (G10) 5/16 x 3” Hex Bolt (with
lock washer, flat washer and t-nut) in the top hole of the Triangle Plate and 1 (G1) 5/16 x 1-1/2” Hex Bolt (with
lock washer, flat washer and t-nut) in the bottom hole, as shown in fig. 8.1 & 8.2.
A8
Swing Rail Assembly
1 x
5/16 x 3-1/2” Hex Bolt (
5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
1 x
5/16 x 4-1/2” Hex Bolt (
5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
1 x
5/16 x 3” Hex Bolt (5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
1 x
5/16 x 1-1/2” Hex Bolt (5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
G1
G11
G10
G5
G1
G5
G11
G10
If you have purchased a 1.2M deck, use Top Bolt holes as shown in fig. 8.1
If you have purchased a 1.5M deck, use Bottom Bolt holes as shown in fig. 8.2
Fig. 8.1
(1.2M Deck Height)
Fig. 8.2
(1.5M Deck Height)
G5
G11
A3
G1
One Rung was removed for
clarity
A8
A3
G10
22
www.selwoodproducts.com
