Step 7: Attach SW Block to Fort
Part 1
If you have purchased a 1.2M deck, remove Top Hole Plugs as shown in fig. 7.1
If you have purchased a 1.5M deck, remove Bottom Hole Plugs as shown in fig. 7.2
A:
On the Swing Wall Side of the fort remove the 2 (H2) 1/4 x 2” Hex Bolts which attaches the Side Roof/Roof
Side and Wall Support to the (F13) Post on the Rock Wall side as shown in fig. 7.1.
To remove the t-nut, loosen
Hex Bolt, hit head with hammer, this should pop the t-nut out.
B:
Remove 4 Hole Plugs from (A3) Two Tier Mount.
F13
Roof Side/Side Roof
Fig. 7.1
(1.2M Deck Height)
Pull this bolt
and t-nut out
Remove Top
Hole Plugs
(1.2M Deck)
A3
Remove Bottom
Hole Plugs
(1.5M Deck)
Fig. 7.2
(1.5M Deck Height)
20
www.selwoodproducts.com
