Hardware
Step 4: Attach Triangle Plates
Part 2
If you have purchased a Meadowside refer to fig. 4.2. Otherwise, refer to fig. 4.3
.
D:
Attach 1 Triangle Plate to the Fort side of both (A1) MK Front Beam and (A2) MK Back Beam using 1
(G1) 5/16 x 1-1/2” Hex Bolt (with lock washer, flat washer and t-nut) in the hole indicated in fig. 4.2 & 4.3.
Correct Triangle placement and hole usage is very important.
E:
Attach 1 (H7) 1/4 x 5-1/2” Hex Bolt (with lock washer, flat washer and t-nut) to the ends of both (A1)
MK Front Beam and (A2) MK Back Beam. The bolts do not attach to anything, but
MUST
be installed to
prevent splitting and checking of wood. (fig.4.2 & 4.3)
H7
Fort Side
Fig. 4.2 (Meadowside)
A2
A1
G1
G1
2 x
1/4 x 5-1/2” Hex Bolt
(1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
2 x
5/16 x 1-1/2” Hex Bolt
(5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
H7
G1
2 x Triangle Plate
Other Parts
Triangle
Plates
www.selwoodproducts.com
Fig. 4.3
Important!
Fort Side
(No Overhang)
Triangle
Plates
Important!
Fort Side
(No Overhang)
G1
G1
(Hidden)
H7
17
www.selwoodproducts.com
