Hardware
Step 4: Attach Triangle Plates
Part 1
A:
Place Monkey Swing Rail Assembly on the ground with the Bolt-Thru. Swing Hangers facing up. (fig. 4.1)
B:
Attach 1 Triangle Plate to the End Ladder side of both (A1) MK Front Beam and (A2) MK Back Beam, in the
places shown in fig. 4.1, using 1 (G1) 5/16 x 1-1/2” Hex Bolt (with lock washer, flat washer and t-nut) in the hole
indicated in fig. 4.1.
Correct Triangle placement and hole usage is very important.
C:
Attach 1 (H7) 1/4 x 5-1/2” Hex Bolt (with lock washer, flat washer and t-nut) to the ends of both (A1) MK Front
Beam and (A2) MK Back Beam. The bolts do not attach to anything, but
MUST
be installed to prevent splitting and
checking of wood. (fig. 4.1)
Fig. 4.1
Bottom Side showing
H7
2 x
1/4 x 5-1/2” Hex Bolt
(1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
2 x
5/16 x 1-1/2” Hex Bolt
(5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
H7
G1
2 x Triangle Plate
Other Parts
Important!
End Ladder Side
(With Overhang)
G1
A1
A2
G1
Triangle
Plates
16
www.selwoodproducts.com