Step 1: Monkey Swing Rail Assembly
A2
A1
Make sure shoulder is against
beam before drilling holes
Note: Pre-drill all holes using a 1/8” drill bit before installing the wood screws.
A:
Insert 6 (A10) 1-1/8 x 15-7/8” Dowels into (A1) MK Front Beam and (A2) MK Back Beam as shown in fig.
1.1. Make sure the pilot holes are at the top of each board.
B:
Make sure shoulder of dowel is against each beam before pre-drilling pilot holes. Drill 1/8” pilot holes
through the beams and into the dowels to prevent splitting. (fig 1.2)
C:
Attach (A10) 1-1/8 x 15-7/8” Dowels to both beams with 2 (S4) #8 x 3” Wood Screws per dowel as shown
in fig. 1.1.
Fig. 1.1
Fig. 1.2
6 x
Dowel Tennon 1-1/8 x 15-7/8”
1 x
MK Front Beam 2 x 6 x 94”
1 x
MK Back Beam 2 x 6 x 94”
A10
Hardware
Wood Parts
12 x
# 8 x 3” Wood Screw
S4
A1
12
A10
S4
S4
A10
x 6
A2
End Ladder Side
Fort Side
Top Side showing
www.selwoodproducts.com
