Note: Pre-drill all holes using a 1/8” drill bit before installing the wood screws.
A:
Insert 3 (A9) 1-1/8 x 18-5/8” Dowels into 2 (A5) End Posts as shown in fig. 2.1.
B:
Make sure shoulder of dowel is against each post before pre-drilling pilot holes. Drill 1/8” pilot holes
through the posts and into the dowel to prevent splitting. (fig. 2.2)
C:
Attach (A9) 1-1/8 x 18-5/8” Dowels to both posts with 3 (S3) #8 x 2-1/2” Wood Screws per post. One screw
is installed from top of the post and the other from the bottom as shown in fig. 2.1.
Step 2: Monkey End Ladder Assembly
Part 1
A9
Make sure shoulder is against
post before drilling holes
Fig. 2.1
Fig. 2.2
Hardware
Wood Parts
13
A5
A5
A9
S3
S3
3 x
Dowel Tennon 1-1/8 x 18-5/8”
2 x
End Post 2 x 4 x 83-1/2”
A9
6 x
# 8 x2-1/2” Wood Screw
S3
A5
www.selwoodproducts.com
