Selden Furlex Electric, Supplementary Manual

Page: 16 / 52

16
3.4 Step by step assembly 204E/304E
Prior to installation, follow steps in chapter 1.4-3.5 in manual 597-132. Note
that more references are made to this manual during the assembly. Protect
the drum unit and motor unit by working on a clean and soft surface.
597-132-E
1.
Slide the swivel over the terminal. Fit the
adaptor halves and connect the luff extrusion
according to point 4-5 in chapter 3.5, manual
597-132.
2.
Remove the clevis pin and split pin from
the motor unit and fit the motor unit over
the hub so that the bronze gear engages
with the carriers in the hub.
3.
Note that the motor unit can be turned 90°
depending on the direction of the forestay
fitting in the boat.
Align the holes in the terminal, shaft and
holder.
Fit the clevis pin and split pin.