Selden Furlex Electric, Supplementary Manual

Page: 24 / 52

24
5.
Check that motor unit fits over hub.
Check that the two locking screws (C) fit.
Note that motor unit can be turned 90°
depending on the direction of the forestay
fitting in the boat. Verifying what holes to
be used at this point will facilitate assembly
in the boat.
Remove screws and motor unit.
6.
Attach the fork terminal to the forestay
fitting.
Fit the clevis pin but do not fit the split pin at
this point.
Support the motor unit temporarily by run-
ning a thin rope or band under the unit and
through the deck fitting.
C