Selden Furlex Electric, Supplementary Manual

Page: 23 / 52

23
3.7 Step by step assembly 200TD/300TD Retrofit
Prior to installation, read chapter 17.4-17.5 in 595-231. Read also chapter 16 “Rigging”
for instructions how to remove the torque tube and de-attaching the forestay.
Note that more references are made to this manual during the assembly.
Always secure the mast with a halyard before detaching the forestay from the swivel.
595-231-E
1.
Remove line guard and line drum. Remove
swivel from the boat.
Clean swivel and lubricate bearings accor-
ding to chapter 15, manual 595-231.
2.
Remove the two grub screws (A). These
screws are secured by locking adhesive,
so heating might be necessary.
Un-screw the fork terminal by turning the
cap (B).
3.
Fit the two carriers. Note direction of
carriers (marked “UP”).
4.
Secure carriers with a piece of tape.
B
A