25
5.4 Fitting the stanchion blocks
The Furlex 204TD kit contains 4 articulating blocks to be fitted on ø25 mm (1”) stanchions. The 304TD kit
contains 1 articulating block to be fitted preferably on a Ø 25 mm (1”) pulpit and 4 fixed stanchion blocks for
fitting on a Ø 25-mm (1”) stanchion. The fixed blocks can be fitted on Ø 30 mm (1 1/4”) stanchions, but the
standard screws must be replaced by M6-25 mm screws.
5.5 Fitting the stanchion blocks
The Furlex 304TD kit contains 1 articulated
block to be fitted preferably on a Ø 25 mm (1”)
pulpit and 4 fixed stanchion blocks for fitting on
a Ø 25-mm (1”) stanchion. The fixed blocks can
be fitted on Ø 30 mm (1 1/4”) stanchions, but the
standard screws must be replaced by M6-25 mm
screws
Fig. 5.5.a
1.
2
Insert the clamp halves into the sheave house as
shown.
Squeeze the clamps together around the
stanchion.
3.
4.
Screw the clamp halves together using the
enclosed M6 screw and nut. Lightly tighten the
screw.
Align the sheave house in the desired direction
and tighten the M6 screw.
5.
6.
Thread the furling line and check the position.
Finally, lock the block in position...
... using the enclosed self-tapping screws.
Fig. 5.4.a
Fig. 5.4.b
Fig. 5.4.c
Fig. 5.4.d
Fig. 5.4.e
Fig. 5.4.f
