7
2 Assembly preparations
2.1. Tools
2.2 Mast attachment
Before starting with the assembly, make sure you have the following tools available:
• Hack saw
• Torx bits and bit holder
• Measuring tape
• Knife
• Hammer
• Pencil
If Sta-lok is to be fitted you will also need:
• Small slotted screw driver
• Two adjustable spanners
• Pair of plyers
• Tape
• File
• Locking adhesive (included in the eye fitting pack)
Always make sure that the forestay can articulate in all directions in the top. Toggles must be used in most
cases to ensure sufficient articulation.
Fig. 2.2.a
Fig. 2.2.b
Fig. 2.2.c
Tools needed for making the hole in deck:
• Hole saw (see table) or jig saw
• Drill bit (see table)
Furlextype
Hole saw
Ø
Drill bit
Ø
204TD
108
6,5
304TD
127
6,5