16
A
3.3 Fitting the furling line
Feed the furling line through the line guide halve with the screws. Feed the rope through the two ”channels” in
the drum. Fit the first screw through the rope approximately 25 mm from the rope end. Then tighten up the rope
and push it into the jaw-slot before fitting the second screw. Do not overtighten the screws! If the sail’s ultravio-
let (UV) protection is fitted on the starboard side, the furling line shall exit on the port side of the line drum and
if the UV protection is fitted on the port side the line shall exit on the starboard side.
3.4 Fitting the brims, the line guide
fitting and cover
1. Fit the four brims.
2. Fit the cover but do not tighten the two screws (A) yet.
3. Feed approximately 24 turns of furling line on to the drum by turning the toggle clockwise if the line shall
exit on portside of the drum, anti-clockwise if it shall exit to starboard. Fine tuning of the drum is described in
chapter 5.3.
