32
1.
1. Loosen the lower screws (A) and collect the screws and the insulation washers.
2. Loosen the upper screws (B). Do it with care and the screws and plastic locking washers will remain on the
line cover.
3. Remove the cover
7.4 Dismantling
Never take the halyard swivel or the drum unit apart as you will find it difficult to re-assemble them correctly.
(The ball-bearings are loose and difficult to refit!). Contact your Furlex dealer if service is required.
7.4.2 Line cover
7.4.1 Sail feeder
Fig. 7.4.1.c
Fig. 7.4.1.a
Fig. 7.4.1.b
Fig. 7.4.2.a
Fig. 7.4.2.b
Fig. 7.4.2.c
1
2
3
Remove the screw.
Bend open the connector slightly
and pull out the sail feeder -
lower end first.
Bend the connector open and
remove it.
7.4.3 Furling line
Loosen the two screws and pull out the line.
A
2.
3.
B
Fig. 7.4.3.a