Sekonic SR-3500, Operating Manual

Page: 73 / 130

- 72 -
■ Printer test
The test characters is printed on the fed sheet and the sheet will be discharged. (This test will
be conducted only when stacker unit and printer unit are installed.)
The number of characters printed varies depending on the printer settings, and character size
and interval settings.
Once reading of the check sheets starts, the test will continue until an error occurs or the
hopper is empty.
Test characters:
“ ■ !”#$%&’()*+, − ./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[¥]^_ 。「」、・
ヲァィゥェォャュョッーアイウエオカキクケコサシスセソタチツテトナニヌネノハヒフヘホ
マミムメモヤユヨラリルレロワン
”
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
3.
Use the
UP
and
DOWN
switches to select [Printer Test].
4.
Press the
FEED/ENTER
switch to con fi rm the selection and display [Printer Test].
(“ * ” mark fl ashes in the fi rst column of the fi rst line on the LCD.)
5.
Use the
UP
and
DOWN
switches to select the setting value.
6.
Press the
FEED/ENTER
switch to start/stop Printer test.
(The fl ashing “ * ” mark disappears from the LCD, and the test will start/stop.)
7.
Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Note)
You cannot return to normal mode while the test is running.
Printer test setting values
• Stop
• Start
Operating tests
■
Printer test
SR-3565(E).indd 72 SR-3565(E).indd 72 2007-8-16 10:20:43 2007-8-16 10:20:43