manualshive.com logo in svg

Sekonic SR-3500, Operating Manual, Page: 65 / 130

Share
Download
Sekonic SR-3500 Operating Manual Download Page 65

-

64

-

Displaying various information

This section explains how to display various setting information.

■

Displaying the version

This displays the versions of the “main body unit,” “front side reading unit,” “back side reading 
unit,” “stacker unit,” “printer unit,” “barcode unit” and other items. (“Back side reading unit,” 
“stacker unit,” “printer unit,” and “barcode unit” display only if they are installed.)
Versions are displayed in a two-digit format.

1.

 Press 

the 

MENU

 switch to enter the menu mode.

2.

 Use 

the 

UP

 and 

DOWN

 switches to select the following parameters,

 

and press the 

FEED/ENTER

 switch.

3.

 Use 

the 

UP

 and 

DOWN

 switches to select [Version Info.],

 

and press the 

FEED/ENTER

 switch.

Note)

If “Version= @@” appears

 

in the display,contact the store where you 

bought.

4.

 Use 

the 

UP

 and 

DOWN

 switches to display individual versions.

5.

  Keep pressing the 

CLEAR/EXIT

 switch until it returns to normal mode,

 

or press the 

MENU

 switch to return to normal mode.

Displaying various information  

■

Displaying the version

SR-3565(E).indd   64

SR-3565(E).indd   64

2007-8-16   10:20:24

2007-8-16   10:20:24

Summary of Contents for SR-3500



































































































































Reviews:

No comments