Sekonic SR-3500, Operating Manual

Page: 44 / 130

- 43 -
■ Setting reading side
You can set the reading side when the optional back-sided reading unit is installed.
The reading side can be set to either “single side” or “double side.”
When reading single-sided sheets, if you set the reading side to “single side,” the back side
won’t be read.
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
3.
Use the
UP
and
DOWN
switches to select [Reading Side] setting,
and press the
FEED/ENTER
switch.
(“ * ” mark fl ashes in the fi rst column of the fi rst line on the LCD.)
4.
Use the
UP
and
DOWN
switches to set the value.
5.
Press the
FEED/ENTER
switch to save the setting value into memory.
(The fl ashing “ * ” mark disappears from the LCD.)
6.
Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Reading side
setting values
• Single Side
• Double Side
Data reading settings
■
Setting reading side
SR-3565(E).indd 43 SR-3565(E).indd 43 2007-8-16 10:19:37 2007-8-16 10:19:37