manualshive.com logo in svg

Sekonic SR-3500, Operating Manual, Page: 67 / 130

Share
Download
Sekonic SR-3500 Operating Manual Download Page 67

-

66

-

■

Displaying back side reading sensor settings

This displays the settings for “sensor pitch” and “sensor type” for the back side reading unit 
in this device. (This display is available only when the device has a back side reading unit 
attached.)

1.

 Press 

the 

MENU

 switch to enter the menu mode.

2.

 Use 

the 

UP

 and 

DOWN

 switches to select the following parameters,

 

and press the 

FEED/ENTER

 switch.

3.

 Use the 

UP

 and 

DOWN

 switches to select [Type of Back Reading Sensor] display, 

and press the 

FEED/ENTER

 switch.

4.

 Use 

the 

UP

 and 

DOWN

 switches to display the settings.

 Sensor 

pitch

 Sensor 

type

5.

  Keep pressing the 

CLEAR/EXIT

 switch until it returns to normal mode,

 

or press the 

MENU

 switch to return to normal mode.

Sensor pitch display
• 0.2 inch     • 0.25 inch
• 0.3 inch     • 1/6 inch

Sensor type display
• Infra Red
• Visible Red

Displaying various information  

■

Displaying back side reading sensor settings

SR-3565(E).indd   66

SR-3565(E).indd   66

2007-8-16   10:20:29

2007-8-16   10:20:29

Summary of Contents for SR-3500



































































































































Reviews:

No comments