Sekonic SR-3500, Operating Manual, Page: 48 / 130

- 47 -
■ Setting Paper hold(SR-3500)
You can set paper hold setting when using SR-600 operating mode.
When paper hold setting is done, after reading, without discharging the sheet you keep on
the inside of this device.The processing number of cards improves with this operation.(It is
the same operation as SR-3500 mode.) However It cannot maintain compatibility when the
software is kept using with replacing OMR SR-600
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
3.
Use the
UP
and
DOWN
switches to select [Paper Hold] setting,
and press the
FEED/ENTER
switch.
(“ * ” mark fl ashes in the fi rst column of the fi rst line on the LCD.)
4.
Use the
UP
and
DOWN
switches to set the value.
5.
Press the
FEED/ENTER
switch to save the setting value into memory.
(The fl ashing “ * ” mark disappears from the LCD.)
6.
Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Data reading settings
■
Paper hold setting
Paper hold
setting values
• Not use
• Use
SR-3565(E).indd 47 SR-3565(E).indd 47 2007-8-16 10:19:47 2007-8-16 10:19:47