Section 3: Using Accessories
Using Foam
2016 Bambi MAX Service Manual
–
Models 4453-7590
(Version D)
14
We Engineer Solutions
Sacksafoam Foam Injection System
The Sacksafoam is SEI Industries’ advanced foam dispensing
system for use with the Bambi MAX. This system, exclusive to the
Bambi, allows foam to be dispensed into the bucket in route from
the filling source to the fire site.
There are three models of Sacksafoam to fit this range of Bambi
MAXs. The operation of the Sacksafoam is controlled by the pilot
through a control unit, which is mounted in the cockpit.
Sacksafoam I contains the foam reservoir directly installed inside
the bucket.
The Sacksafoam II is a self-contained unit that can be stowed onboard the
helicopter. This system is completely housed in a foam-resistant case. With the
Sacksafoam II, the pilot still controls the foam dispensing through the control
unit.
The Sacksafoam III is identical to the Sacksafoam II, except that the controller is
mounted in the foam resistant case in the Sacksafoam III.
If additional foam storage is required, the Sacksafoam Plus can be purchased
to add an additional 40 gallons of foam on board.
Sacksafoam I
Sacksafoam II,
Model 5598
Sacksafoam Plus
