manualshive.com logo in svg

SEI Industries BAMBI MAX BBX4453, Service Manual, Page: 48 / 105

Share
Download
SEI Industries BAMBI MAX BBX4453 Service Manual Download Page 48

Section 8: Repair Quick Guide  

 IDS Hub Repair Criteria

2016 Bambi MAX Service Manual 

– 

Models 4453-7590 

(Version D)

  43

We Engineer Solutions

IDS Hub Repair Criteria

•

Cracks or breaks across the major section of the IDS hub.

•

Two or more broken or cracked spoke brackets.

•

Two or more broken or missing spokes, clevis pins, shell brackets.

•

Three or more bent spokes (bends in excess of 20 degrees = broken).

•

One broken or cracked spoke bracket on IDS hub.

•

One broken or missing spoke.

•

One broken or missing clevis pin or shell bracket.

•

Up to two bent spokes.

•

Wear on IDS hub.

•

Dents, abrasions and wear on spokes.

•

Clevis pin and shell bracket wear.

Category 1: Safety
Cease operations and repair immediately.

Category 2: Operational
Repair before next days operation or eight hours flight time.

Category 3: Monitor
Monitor and/or repair if condition deteriorates.

Category 4: Okay
Does not need repair.

Summary of Contents for BAMBI MAX BBX4453










































































































Reviews:

No comments