Segway®
Personal
Transporter
i2,
x2,
x2
Turf
Parts
Replacement
Guide
6
‐
3
Before Removing Fascias
1.
Make
sure
Segway
PT
is
powered
off
and
unplugged.
2.
Remove
one
tire/wheel
assembly:
•
Model
i2,
•
Model
x2,
•
Model
x2
Turf,
3.
Because
of
interference
on
the
i2
and
x2,
you
must
remove
the
following:
•
(Model
i2
only)
Remove
one
fender
(
).
•
(Model
x2
only)
Remove
both
fenders
(
)
and
fender
frames
as
a
unit
(
).
All
PT
models
have
been
manufactured
with
one
of
two
revisions
of
the
console
housing
and
trim.
The
revision
is
determined
by
the
part
number
of
the
console
trim,
which
is
located
on
the
forward
part
of
the
housing
and
is
visible
after
the
cover
is
removed.
The
part
numbers
for
each
revision
of
the
console
trim
are
as
follows:
•
First
Revision:
20951
‐
00001
(Black)
or
20951
‐
00002
(White)
•
Second
Revision:
21281
‐
00001
(Black)
or
21281
‐
00002
(White)
First-revision console housing cover parts are no
longer manufactured or supported. First-revision
components are not compatible with second-
revision components; similarly, second-revision
components are not backward compatible with
first-revision components. AS A RESULT, IF ANY
FIRST-REVISION CONSOLE HOUSING, GASKET,
OR COVER IS DAMAGED, THE COVER, GASKET,
HOUSING, AND TRIM MUST ALL BE REPLACED
USING THE CURRENT (SECOND) REVISION.
