Segway Personal Transporter i2, Parts Replacement Manual

Page: 24 / 126

1 ‐ 8 Segway® Personal Transporter i2, x2, x2 Turf Parts Replacement
Wireless InfoKey Controller Dock Removal and Installation
To remove Wireless InfoKey controller dock:
1. Make sure Segway PT is powered off and
unplugged.
2. Using 3mm hex wrench, remove fastener
that holds Wireless InfoKey controller dock
to LeanSteer frame. See Figure 1 ‐ 11 .
3. Remove Wireless InfoKey controller dock.
Figure 1 ‐ 11: Replace Wireless InfoKey Controller Dock
To install Wireless InfoKey controller dock:
1. Make sure Segway PT is powered off and
unplugged.
2. Place Wireless InfoKey controller dock
against upper LeanSteer frame with release
tab oriented at bottom. See Figure 1 ‐ 11 .
3. Thread 3mm fastener (20306 ‐ 00003) through
hole in top of Wireless InfoKey controller
dock and into upper LeanSteer frame.
4. Using 3mm hex wrench, tighten fastener to
2.0 N ‐ m (18 in ‐ lbf).
5. Perform post ‐ service tests ( page A ‐ 1 ).
InfoKey Dock
20946-00001
20306-00003