Segway Personal Transporter i2, Parts Replacement Manual

Page: 47 / 126

Segway® Personal Transporter i2, x2, x2 Turf Parts Replacement Guide 5 ‐ 3
Fender Removal and Installation, i2
To remove fender:
1. Make sure Segway PT is powered off and
unplugged.
2. Remove tire/wheel assembly ( page 4 ‐ 3 ).
3. Using a T ‐ 20 6 ‐ lobe , remove (4) button ‐ head
fasteners. See Figure 5 ‐ 1 .
Figure 5 ‐ 1: Remove or Install Fender, i2
4. Lift fender and remove from gearbox.
To install fender:
1. Make sure Segway PT is powered off and
unplugged.
2. Orient and place fender on gearbox. Use T ‐
20 6 ‐ lobe wrench to drive (4) button ‐ head
fasteners (20538 ‐ 00001) and torque to
1.5 N ‐ m. See Figure 5 ‐ 1 .
3. Install tire/wheel assembly ( page 4 ‐ 3 ).
4. Perform post ‐ service tests ( page A ‐ 2 ).
Fender
20945-00001
20538-00001