A
-2
Segway®
Personal
Transporter
i2,
x2,
x2
Turf
Parts
Replacement
Standard Check
To perform a standard check, do the following:
1.
Check
that
fasteners
are
in
place,
secure,
and
torqued
correctly.
2.
Check
wheels
for
wear,
tightness,
and
tire
pressure.
3.
Check
that
mats
are
intact,
secure,
and
free
of
debris.
4.
Check
LeanSteer
frame
for
tightness;
make
sure
LeanSteer
frame
returns
to
center.
5.
Check
to
make
sure
that
no
part
is
damaged
or
loose.
Operational Test
To perform an operational test, do the following:
1.
Check
for
obstruction
under
mats.
2.
Check
LeanSteer
frame
for
tightness
and
centered
orientation.
3.
Turn
on
and
power
off
machine
twice.
4.
Confirm
adequate
battery
levels.
5.
Turn
on
machine
to
test
rider
detect.
(Make
sure
that
display
does
not
indicate
that
rider
detect
button
is
on
at
start
‐
up.)
Tilt
unit
back
and
press
on
each
rider
detect
button.
6.
While
holding
machine
platform
level,
tap
mat
with
your
foot
to
enter
balance
mode.
7.
Step
on
and
ride
machine.
a. Move
forward
and
backward.
b. Turn
360
degrees
to
the
left
and
to
the
right.
