Sega Ford Racing Full Blown Deluxe, Operation Manual

Page: 62 / 81

When performing any work, be sure to turn the power off. Working with the power on can cause
electric shock or short circuit hazard.
The Fluorescent Lamp can get hot towards the ends of the unit. Be careful when handling the
Lamp and / or Ballast.
•
•
To perform work safely and securely, be sure to prepare a step which is in a secure condition.
Performing work without a step can cause accidents.
•
1. Remove the 5 truss head screws which secure the top retaining bar to the billboard box.
2. Remove the top retaining bar.
3. Remove the Title panel in an upward movement.
The title panel is made from a flexible material and will bend along the contour of the billboard
box.
4. Remove the lamp by uncoupling it from the retaining clips and gently pulling it forward.
5. Remove the end caps and replace the lamp.
6. Reassemble in reverse order.
Billboard Lamp
Replacement of Fluorescent Lamps