Sega Ford Racing Full Blown Deluxe, Operation Manual

Page: 63 / 81

When performing any work, be sure to turn the power off. Working with the power on can cause
electric shock or short circuit hazard.
The Fluorescent Lamp can get hot towards the ends of the unit. Be careful when handling the
Lamp and / or Ballast.
•
•
LED CLUSTER BLU (LT1053)
LED CLUSTER YEL (LT1051)
BTN RND 12V BLU (509-6001-B)
BTN RND 12V YEL (509-6001-Y)
Remove the 4x M4x8 Security screws
and take out the SWITCH ASSY
Remove the Lamp Housing from its location and
then the LED CLUSTER.
Replace the LED CLUSTER and reassemble in
reverse order.
SEGA Logo Lamp
START and VIEW LAMP
Loosen the 2x M4 nuts from the sides of the FLO mounting
bracket and carefully remove the bracket & ballast.
The Lamp is located on the opposite side of the
bracket. Carefully unclip the lamp to replace.
ASSY FLO TUBE, located inside
ASSY MASK
59