This test is used to test the network link between two computers in a twin cabinet.
STATUS OK
if Ethernet link is operating, NOT AVAILABLE otherwise
CABINET ID
ID of this cabinet, variable from 1 to 6. No linked cabinets should have
the same ID. Once changed, the user must select CONFIRM CHANGES to
complete the setting.
CONFIRM CHANGES The user will be prompted to confirm YES or NO. If YES is selected, the
system will perform a system reboot. If NO is selected, no action will be action.
EXIT
Exit to System Menu
In order for the network status to display OK, BOTH sides of the cabinet must be set to network test.
When selected, the test will send data packets between the two systems to validate the link. If the link is
valid, the display will be shown OK. If the link is disconnected or otherwise not functioning, the display
will show NOT AVAILABLE.
NETWORK TEST
51
Summary of Contents for Ford Racing Full Blown Deluxe
