Sega Ford Racing Full Blown Deluxe, Operation Manual

Page: 8 / 81

When installing or inspecting the machine, be very careful of the following points and pay attention to
ensure that the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the cautionary
matters herein stated can cause personal injury or damage to the equipment.
Before performing the work, be sure to turn the power off. Performing work without turning the
power off can cause electric shock or a short circuit condition. In the cases where work should
be carried out when the equipment is powered on, this manual will always state to that effect.
To avoid electric shock or short circuit, do not plug in or unplug quickly.
To avoid electrical shock, do not plug in or unplug with wet hands or within a wet environment.
Do not expose Power Cords or Earth wires on the surface, (floor, etc.). If exposed, the power
cord and or Earth wires may be susceptible to damage. Damage cords or wires may cause and
electric shock or short circuit.
To avoid causing electric shock or fires, do not rest or put objects upon the power cords.
During or after installing the product, do not unnecessarily pull the power cord. If damaged the
power cord can cause electric shock, fire or a short circuit hazard.
In case the power cord is damaged, ask for a replacement through where the product was
purchased or from the office stated herein. Using a damaged or faulty power cord may cause
electric shock, fire or a short circuit condition.
Be sure to earth the product correctly. Inappropriate earthing may cause electric shock or fire
hazard.
Be sure to use fuses that meet the specified rating for the product. Using fuses exceeding the
specified rating may cause electric shock and or fire hazard.
Be sure all connectors are firmly made. Connectors that are not completely made can cause a
fire hazard.
To avoid causing electric shock, short circuit or fire hazards, do not make specification changes
by removing, converting or by making any additions to the product unless otherwise designated
by SEGA.
Be sure to perform periodic maintenance inspections herein stated.
•
•
•
•
•
•
•
•
•
•
•
•
For IC board inspections only use a logic analyser / tester. The use of a multi-purpose tester is
not permitted.
When cleaning the CRT or display surface, use a dry soft cloth. DO not apply chemicals such
as thinner, benzine, etc.
The electronic parts of the IC board can be damaged due to static electricity carried by the hu-
man body. Before performing any IC board related work, be sure to discharge any physically
accumulated static by touching a grounded metallic surface or by attaching an earth strap.
•
•
•
HANDLING PRECAUTIONS