This test is used to test and calibrate the peripherals connected to the UGCI interface.
STEERING
00H = Full Left lock, 80H = Centre, FFH = Full right lock
ACCELERATOR
00H = pedal fully up, FFH = pedal fully down
BRAKE
00H = pedal fully up, FFH = pedal fully down
GEAR SHIFT
UP = stick up, N = stick central, DOWN = stick down
START
On = pressed, OFF = not pressed
CHANGE VIEW
On = pressed, OFF = not pressed
SERVICE
On = pressed, OFF = not pressed
TEST
On = pressed, OFF = not pressed
EXIT
Exit to System Menu
Please refer to the CALIBRATION TEST for calibrating the hand and foot controllers.
As this test will check for functionality of both the TEST and SERVICE buttons, in order to exit this test,
BOTH buttons must be pressed simultaneously.
INPUT TEST
Summary of Contents for Ford Racing Full Blown Deluxe
