Sega Ford Racing Full Blown Deluxe, Operation Manual

Page: 72 / 81

Game credits between the Coin Mechanism and the PC is controlled by an Excel Credit Board. This
electronic circuit allows the price of play to be set to a wide range settings. It also enables the operator
to set the machine to different types of coin specifications such as GB Sterling or the EURO amongst
many others. The functions are available by manipulating the DIL (Dual In Line) switches mounted upon
the PCB.
DIL-2 allows the operator to set the currency (or coin ratio) and DIL 1 provides the price of play. Please
refer to the “OPTION” and “PRICE of PLAY” setting tables on the following pages.
The Excel Credit board (pictures below) is mounted on the coin mech panel which is opened and closed
using a service key.
Wiring Harness Validator Connector Type
LM1006 Money Controls 15 way
LM1007 Mars 13 way
LM1008 Mechanical See Note 1
N/A NRI See note 2
NOTES
1. Mechanical coin mechanisms may be connected in parallel, allowing two identical mechanisms
to be fitted.
2. If NRI mechanisms are to be used, these should be ordered with the highest denomination coin
programmed into coin path #1 and the lowest denomination coin programmed into coin path #4.
The Ecxel board should then be set up for either UK or EURO coins. A minimum connecting
lead length of 150mm is required.
SW3 (Bank 6)
SW1 (Bank 5)
SW1 (Bank 5)
SW1 (Bank 5)
SW1 (Bank 5)
SW1 (Bank 5)
EXCEL CREDIT BOARD
Excel Credit PCB