Rostock Max Assembly Guide
11
1.19 - Using #6-32 Nylon lock nuts and #6-32, 1” flat head machine screws, install the
cover brackets in the base.
Figure 15 - Cover Brackets and Electronics Door installed.
1.20 – Install Electronics Mount (P/N: 68358) and Support Panel (P/N: 68357). Refer to Fig. 15
above for the location of the Electronics Panel. The door “pin” fits into the hole located next to
the X axis T-Slot mount.
1.21 - Install the Support Panel as shown – the door “pin” fits into the hole next to the Y axis T-
Slot mount.
Figure 16 - Support Door installation.