Rostock Max Assembly Guide
23
9 – Assembling and Installing the Idler Mounts
9.1 - Assemble the three Idler Brackets from the six Idler Mount parts (P/N: 68369) and the
three Top Clamps (P/N: 68370)
9.2 - Insert the remaining 1/4-20 button head screws as shown in the photo below.
9.3 - Note that you may want to keep the writing facing "in" in order to make sure the horizontal
alignment mark is visible.
Figure 32 - Button Head Screws Installed
9.4 - Assemble each Idler Mount as shown below and then attach them to the top plate as
shown in Fig. 34.
Figure 33 - Idler Mount Assembled