16
|
MAGIQTOUCH & MAGIQCOOL MODELS
SETTINGS MENU
The SETTINGS menu in the MagIQtouch
replaces the parameters menu used in the past
controllers.
Some settings are protected by an access
code to prevent customers changing important
parameters
The access code is 7378.
The SETTINGS menu contains a GENERAL
menu relating to the Controller and the system
as a whole, COOLER and HEATER menus
depending on what has been installed, and a
SERVICE menu containing component details
and fault information.
Note!
The controller will only display the
menus and menu items that are relevant to the
installed system.
Navigate through the menus by tapping the
heading tabs at the top of the screen.
ILL1622-A
GENERAL MENU
ILL1623-B
ILL1862-A
Time and Date
Set or adjust time and date.
Language
Set language (more languages coming soon).
°C / °F (temperature unit)
Select the unit to be used for the system
temperature.
Child Access Lock
Restrict access to any system change by
applying a pin code.
Standby Screen Brightness
Adjust screen brightness when controller goes
into sleep mode.
Status information Display
For troubleshooting & diagnostics.
Air Sensor Selection (when Air Sensor is
fitted)
Select Air Sensor to overdrive sensor in wall
controller.
Software Revision
Display MagIQtouch controller software
revision. (Software revision 21R0415 and
higher are compatible with TQ heaters and
Invertair Add on coolers).
Simple Mode Lock
Lock the operation screen to “Simple Display”
unless the “MORE” button is pressed and held.
Shut Down Timer
When activated, the function will automatically.
switch off the running appliance after the time
duration specified.
Auto Restart
Automatically restarts after power failure in the
last mode it was running in.
Temperature Calibration
Apply an offset to the temperature sensor as
required.
Install Add On Cooler
Option to add a fixed speed or inverter add on
cooler when a heater is used in the system.
System Configuration
View or modify components installed within the
system. For more information see “MANAGING
COMPONENTS” section.
System Reset
Reset either the controller only or the whole
system (including controller and all coolers/
heaters/components) connected within the
system.
