Release Version 1.2
12
4-2-1-5. Spot Monitor
▶ Enter [Display]
→
[Spot Monitor] to show the following screen.
- Select the channels to be in Auto Sequence mode of Spot monitor and set the display switching
time
∙ X1 Seq: Set the display switching time in Full screen.
∙ X4 Seq: Set the display switching time in Quad screen.
∙ X8 Seq: Set the display switching time in 8-split screen.
∙ X9 Seq: Set the display switching time in 9-split screen.
∙ X10 Seq: Set the display switching time in 10-split screen.
- Select(
) the cameras to be added in to the Spot monitor’s Auto Sequence mode. Non-selected
cameras will be eliminated from the sequence mode.
- Set up the display switching time among 3, 5, 10, 15, 30, 60 seconds in the camera list.
- Click ‘All’ to set up the display switching for every camera at once.
- Close the setup menu, move the mouse cursor to the left side and click the Spot Out split mode
icon (
) or Spot Out Sequence icon(
) to start the mode in demand for SPOT.
- Available to set each camera video to the position where a user prefers in X4, X8, X9, X10 Seq
modes.
